How much energy is your treadmill consuming? The answer lies in the amps it draws. If you’re unsure of what this means, don’t worry – we are here to help.

In this blog post, we’ll explore the question, “How many amps does a treadmill use?” and provide a detailed explanation.

You might be surprised to learn that the answer isn’t straightforward.

The treadmill draw depends on several factors, including the motor’s horsepower, the speed you’re running at, and the incline level.

Understanding these variables is crucial to ensure you are not overloading your circuit or paying more on your electricity bill than necessary.

So, let’s dive in and get to the bottom of this amp-drawing mystery.

How Many Amps Does a Treadmill Use

Do you know about the treadmill amp draw and how much power it uses? The answer may surprise you.

On average, a treadmill draws anywhere between 6 to 20 amps, depending on the model’s size and features.

However, if you plan to use your treadmill at full speed with an incline, the amp draw can spike to around 20 amps, which may overload a typical household circuit.

You must check the manufacturer’s specifications and your electrical system’s capacity to ensure you are not causing any damage or risking a power outage.

How Many Watts Does a Treadmill Use?

If you’re trying to monitor your energy consumption, you may wonder about your treadmill’s power consumption.

The answer lies in the watts it uses. On average, treadmills consume around 600 to 700 watts of electricity.

However, the actual wattage may vary depending on several factors, including the motor’s horsepower, speed, and incline level.

Understanding your treadmill’s power usage can help you save on your electricity bill and reduce your carbon footprint. 

How Many Watts Do Different Treadmills Use in a Year?

Treadmill WattageHours Per Year RunYearly KWH Of Electricity
500 W15678.0 kWh
550 W15685.8 kWh
600 W15693.6 kWh
650 W156101.4 kWh
700 W156109.2 kWh
750 W156117.0 kWh
800 W156124.8 kWh

How Much Does It Cost To Power a Treadmill?

Understanding your treadmill power consumption is essential for checking your electricity bill.

On average, an electric treadmill uses between 600 and 700 watts (W). If you use it three times a week, you can expect it to consume around 101.4 kWh of power annually. But how much will this impact your wallet? The answer is not much.

The average cost is only $1.20 per month and $14.39 per year, which is a small price for your health and fitness.

StateAverage Electricity Rate Cost Per MonthCost Per Year
Massachusetts22.59 ¢ / kWh$1.91$22.91
California22.00 ¢ / kWh$1.86$22.31
New York20.59 ¢ / kWh$1.74$20.88
New Jersey16.20 ¢ / kWh$1.37$16.43
Maryland14.48 ¢ / kWh$1.22$14.68
US Average14.19 ¢ / kWh$1.20$14.39
Texas12.56 ¢ / kWh$1.06$12.74
Virginia12.58 ¢ / kWh$1.06$12.76
Florida12.21 ¢ / kWh$1.03$12.38

Tips For Cutting or Reducing Your Treadmill’s Electricity Costs

If you enjoy working out, you are aware of how expensive a treadmill can be.

However, the associated electrical costs might soon mount up as well.

Fortunately, there are several easy measures you can take to save money on energy while still getting the most out of your treadmill workout.

Maintain the Treadmill

How Many Amps Does a Treadmill Use

The amount of power your treadmill needs may be decreased by keeping it in excellent condition. Regular upkeep, including lubricating the belt and inspecting the motor, may significantly improve performance.

Running more effectively, a well-maintained treadmill uses less energy, thus lowering your power cost.

Don’t Stand Idle on The Treadmill

If you’re not walking on a treadmill, it’s best to turn it off. Leaving it on standby mode may seem small but it can add up over time. Turning off the treadmill can save significant energy, translating into savings on your electricity bill.

Can I Run My Treadmill on an Extension Cord?

It’s best not to run your treadmill on an extension cord. An extension cord may not provide the required power to run the treadmill, which can cause damage to the machine and pose a safety risk.

It’s recommended to plug your treadmill directly into an electrical outlet with a surge protector to ensure safe and efficient operation.

Is An Electronic Treadmill Preferable To a Manual One?

An electronic treadmill may cost more upfront, but it’s more energy-efficient than a manual one. A manual treadmill relies on your movement to power it, while an electronic one uses electricity to run the motor.

This means that a manual treadmill will require more energy from you to operate, while an electronic one will consume less energy overall.

Treadmill Power Requirements

A standard 120 Volt AC outlet on a 15 Amp circuit is sufficient for most residential treadmills. However, it should be a dedicated, non-switched, non-GFI, grounded line to prevent circuit breaker overloading.

This dedicated circuit means no other outlets are connected, ensuring that the treadmill is the only appliance drawing power from the circuit.

In contrast, commercial treadmills can require a 120 VAC or a standard 220 VAC power supply. Even 120 VAC commercial treadmills usually need a 20 Amp service. And some commercial treadmills require three-phase 220 VAC.

Regardless of the treadmill’s specifications, each one should be on a dedicated line. So, it’s crucial to verify the power requirements of your treadmill before installing it and avoid any damage caused by electrical overload.

Additionally, selecting the best treadmill running shoes will help to reduce the impact on your joints and help you to work out more effectively.

What Size Motor For Treadmill

If you’re in the market for a treadmill, you may wonder what a good size motor is.

The answer to this question depends on your fitness goals and how you plan to use your treadmill.

Generally speaking, the average motor size for a treadmill is 2.5 HP. However, consider a larger motor size if you plan on using your treadmill for intense running or incline training.

Choosing a motor size that can handle the demands of your workout routine is essential to ensure your treadmill operates efficiently and lasts for years to come.

Frequently Asked Questions


The number of amps that a treadmill uses depends on its motor size, horsepower, and the speed at which it is operated.

Typically, a treadmill will use between 15 and 20 amps. It’s important to check the specifications of your treadmill and ensure that the electrical circuit it’s plugged into can handle the power consumption to avoid any electrical hazards.

By monitoring the amps your treadmill uses, you can ensure that it’s running efficiently and that you’re not wasting energy.

Do you have any other questions about the power consumption of treadmills or other fitness equipment? Let us know in the comments below!